
The versatile panelmeter 2041 is designed for strain gauge sensors. Strain gauge sensors can be connected with 4 or 6 wires. The 6-wire connection removes the lead wire resistance, as bridge voltage is measured from the sensor poles, and therefore it is recommended for applications requiring very high accuracy. The panelmeter provides 10 V excitation voltage for sensors, max. four 350 ohm sensors. Options to the 2041 include output 0/4-20 mA , 0-10V, 2..4 alarms or serial output RS-485/232.
Display scaling and taring is easy via front panel keys. Scaling can be carried out in two different ways, either by applying the mV values of the bridge or using the teaching function. The teaching is done by first loading the sensors with the min. weight and then with the max. weight, after which the meter will automatically count the scaling. In applications where the sensor loading is not in balance a separate serial connection unit of the sensors.
Load manuals (pdf)
Load datasheets (pdf)
Load technical drawings
Input details
inputs
strain gauge sensors
measuring range
25...50 mV
drift
0,0028 % / °C
accuracy
0.05% full scale
Display details
display color
red
number of digits
6
indicator lights
alarm levels 1 and 2
display
7-segment LED
digit size
14.5 mm
Power supply
power consumption
2,5 VA
current consumption
24 VDC: 70...110 mA depending on the digit count
supply voltage
24 VDC: 12...32 VDC / 24 VAC, 230 VAC: 85-260 V AC/DC
General information
weight
240 g
protection class
IP65 (front panel with a rubber gasket provided)
dimensions
96 x 48 x115 mm (WHD)
installation
panel
minimum ambient temperature
-10°C
case material
plastic, black
maximum ambient temperature
60°C