Our website uses cookies. Accept
In English Suomeksi

2800-2251

2 channel frequency display

Manufacturer

Nokeval

Article

93680

The panel field display is designed for two pulse sensors such as NPN-, PNP-, Namur -sensors, closing contact or pickup. The meter calculates the difference between the input frequencies, subtraction A-B, or alternatively, the meter divides the input frequencies, division A/B.

The input frequency range 0,0001Hz..5 kHz is exceptionally wide starting with very low frequencies. The display is scaleable on the whole frequency range, e.g. 0-1,23 Hz can correspond to the range 0-5000 on the display. Output is freely scaleable on the basis of the display, e.g. 4-20 mA. Two different measuring methods are applied: in low frequencies the time interval between two incoming pulses is measured and in higher frequencies the frequency . The display also provides a power supply of 24VDC, max. 150 mA for a sensor.

The field display has one optional card slot and there are several options available: output 0/4-20 mA, 0-10V, alarms or serial output RS-485/232. The optional cards can easily be added on afterwards as well.

The alarm relay card (or I/O -card) may also be used as an output for a pulse divider. The pulse divider transmits a pulse for instance to an external counter when the pulse rate set in the divider is reached (e.g. 1 pulse/ 1000 litres).

Load manuals (pdf)
Scalable difference display (speed) for two pulse sensors (pulse/sec.).