Our website uses cookies. Accept
In English Suomeksi


Moisture Meter, Microwave



As a quality measurement instrument that is "made in Germany", the T610 convinces with digital accuracy in high-quality two-component construction.

By means of microwave technology it is possible to detect distributions of moisture content at a depth of up to 300 mm. Another advantage of the method, in addition to the great measuring depth, is its independence from the level of salt content in the material. It therefore makes no difference to the microwave technique whether an older or a new building is being measured. Since the instrument"s screen can display two values, for purposes of results evaluation a function value can be displayed at the same time as the current measured value if required.

For an immediate evaluation of the measured data, minimum, maximum and average functions are available. In addition the current measured value can be retained by means of the hold function.

You can connect the T610 moisture meter to a PC with a USB cable. With the MultiMeasure Studio Software (free in the service / download section of uk.trotec.com) the measured values of the T610 can be transferred online and in real time to the PC. In this way, the values are saved for later analysis or reports.

With the online-memory function, you can perform raster measurements on the computer, e.g. when measuring the building moisture on a cellar wall.

A particular practical advantage is the alarm function:

Here an individual limit value is entered into the unit before any measurements are taken. In this way large wall or floor areas can be measured quickly and effectively. The user can concentrate on the object being measured without having to look constantly at the measurement results on the display. As soon as the pre-defined alarm limit value is exceeded an acoustic warning signal sounds automatically!

A few practical benefits:

Measuring device designed and produced according to the highest quality standards in Germany
German industrial design in robust, premium two-component construction with IP54 type of protection
Continuous easy-to-clean glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measured values even in the sunlight
Capacitive touchscreen control panel
High-resolution colour display for simultaneous indication of two measured values
Specifically designed for quick, non-destructive sub-surface measurements
Moisture alarm function
Grid measurement function via USB with active software connection
Incl. MultiMeasure Studio measurement data management software (standard download version)

Technical data:

Material moisture measuring: depth moisture
Measuring principle: microwave method
Measuring range: 0 to 200 digits
Resolution: 0.1 digits
Accuracy: 0.1 digits
Penetration depth: up to 300 mm
Alarm signal: acoustic
Upper menu options: MAX, MIN, HOLD, AVG, ACT
Lower menu options: LIGHT, ALARM, CAL

Related products


Portable humidity meter

The T610 is a professional hand-held measuring device from the Trotec MultiMeasure series for a rapid non-destructive moisture measurement up to 300 mm.