Wireless temperature transmitter with M12 connector
Typically in stock
FT10-RT433-CS is a wireless transmitter with M12-connector for external Pt100 and Pt1000 sensors. The device consists of a radio transmitter module FT10-RT433, a measurement module FT10-CS and a whip-antenna. The design and construction of the device ensures high measuring accuracy and stability along with outstanding durability and resistance against adverse environmental conditions. The device includes 433.92 MHz radio transmitter and detachable whip-antenna which enables transmissions even out of closed steel cabinets and other difficult targets.
Separately ordered Pt100 and Pt1000 sensors can be connected via gland to internal connector. To achieve the best cable sensor accuracy and ease of connection we recommend using 4-wire cable sensors. Separately ordered TRE series PT100 probes can be connected. Other separately ordered Pt100 and Pt1000 sensors can be connected with included male M12 connector. To achieve the best cable sensor accuracy and ease of connection we recommend using 4-wire cable sensors.
The measuring module recommended calibration period is two years. A radio transmitter module does not need calibration so it stays attached in its original installation place with an antenna.
The measuring module recommended calibration period is two years. The calibration agreement is offered as an additional service. The service includes replacement measurement modules delivered automatically when the calibration date is approaching. The replacement modules are changed to the places of the measurement modules that are currently in use. This prevents breaks in measurement cost-effectively. For users in need of extreme accuracy we can offer calibration of the measurement module and the sensor together, when both the measurement module and the sensor need to be sent to us. The battery is also changed together with calibration, though it would have power left even for several years to come.
The device fulfills the mechanical and measuring accuracy requirements of the EN 13485 standard. It also conforms to the requirements of the standards EN 13486 and EN 12830 where applicable.
Load manuals (pdf)
5 s...5 min
1000 m (open space)
433 MHz radio signal
Over 3 years (80 s transmission interval)
Battery: 1.5 V AA alkaline
External Pt100, Pt1000
M12 connector, 4 pole, female
minimum ambient temperature
maximum ambient temperature
plastic (PC, ABS+PC)