Our website uses cookies. Accept
In English Suomeksi

FTR970B-PRO

Recording receiver in a field enclosure

Manufacturer

Nokeval

Availability

typically in stock

Article

92935

 

FTR970-PRO is radio data receiver with data logging used with Nokeval MTR- and FTR-series radio transmitters. Device can receive, unpack and buffer data packets into its memory from transmitters. It identifies automatically the type of a transmitter, so it can be used simultaneously with different transmitters and with different transmit periods. FTR970-PRO uses license free frequency range of 433.92 MHz, so it can be used freely in areas where this so called ISM frequency range is allowed, covering almost whole Europe. 


Receiver can be connected to computer using RS-485, RS-232 or USB bus. The PRO receiver can be used with PromoLog software, or any software supporting Modbus RTU or Nokeval SCL.

Nokeval SCL or Modbus RTU protocols are used for data transfer. When RS-485 is used there can be several FTR970-PRO devices on the bus and they can be positioned to cover larger receive area. Receiver has four diagnostics leds and it needs operating voltage between 8..30 VDC.

Load manuals (pdf)

Connection details

programming

Mekuwin


bus interface

RS-232
RS-485
USB


baud rates

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400


bus protocol

Modbus RTU
Nokeval SCL
NOPSA

Logger details

memory

150 000 samples
2 Mb Flash

Power supply

current consumption

Max 80 mA


supply voltage

24 VDC: 8...30 VDC

General information

cable glands

1x PG-11


protection class

IP65


dimensions

70 x 85 x 60 mm (LWD)


installation

wall mount


minimum ambient temperature

-30°C


maximum ambient temperature

60°C


case material

ABS plastic, gray

Receiver for wireless transmitters in a field enclosure. The device has RS-232, RS-485 and USB interfaces and internal memory for up to 150.000 measurements.